* The high and low frequency of the outgoing signal can be selected; * The width of the output voltage pulse (ie the lighting time of the light source) can be set to 0-999μs; * Can work in external trigger mode, set the light source time as needed; * It can also work in internal trigger mode, lighting the light source time according to the set frequency; * When the load is over-current and short-circuited, the controller will automatically protect and stop the output, and it can be restored after the fault is removed and the power is turned on again.
| Name |
Strobe controller |
| Model |
K792-T4-200 / K792-T4-400 |
| The output voltage |
24V |
| Total output current |
2.5A |
| External trigger voltage |
5～24V |
| Output Power |
200W/400W |
| Over current protection |
>2.5A |
| The most electric current on the single road |
2.5A |
| Input power |
100～240VAC |
| Trigger delay time |
<7μs |
| Adjustable brightness level |
0～999μs adjustable |
| communication method |
RS232/network port |
| Environment humidityn |
0～40℃ |
VND
